The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'

Topic-icon Need 3d printer to make up dash part

More
1 month 2 weeks ago #5294 by 15295
Replied by 15295 on topic Need 3d printer to make up dash part
I'm having a really difficult time adding pictures. There used to be a ikon up in the corner that you would push for inserting a pic now there's nothing

Please Log in to join the conversation.

  • jackpetropoulos
  • jackpetropoulos's Avatar Topic Author
  • Offline
  • R100 Level
  • R100 Level
More
1 month 2 weeks ago #5295 by jackpetropoulos
Replied by jackpetropoulos on topic Need 3d printer to make up dash part
15295 I see your attachment in your initial post but cannot get it to resolve. Attachments now are added through the icon at the bottom of the new post window

There appear to be a couple of impact (bash) plates available on ebay if you are looking

I have the appropriate impact plate for my RS but it needs to be modified (extended by ~3" toward the instrument cluster) as a result of being moved back by ~3" along with the handle bars as part of installation of a couple of bar backs. Wobbly's post gives me reason to believe that an RT impact plate may at least partially solve the problem. Best would be if I could find a CAD designer to mock up a design and a 3D printer to fool around with making up a part.

Please Log in to join the conversation.

Moderators: 8166Wobbly
Time to create page: 1.144 seconds