
Last seen: 09/09/2025 20:20
I added framing to strengthen mine because I added AUX. lighting and the added support was used specifically to anchor those AUX. 3-4-5" lights ...
take some time to remove the cyl head header pipes and wire brush clean the threads. Then add some nickel anti-seize paste to those threads . this s...
here is a wire diagram LED-Turn-Signal-wire-SBL-.jpeg
WHY IS THIS SITE SOOOOOOOOOOO HARD TO EDIT, ADD PHOTOS .... & ... THAT DON'T SHOW .... W/O CLICKING A LINK???
1x19 5-8-1x19-ehs-strand-cable-40200-lbs-breaking-strength-29.jpg 7x7-brake-cable-vbnbv-.jpg
You all should know that: the stock cables bmw sells are 1x19 strands inner wire.There are better inner wires available. Flanders company [john]...
Examples of readings BC – Thread diameter is 14mm P – Projecting insulator type R – Resistor 5 – Heat rating of 5 E – Thread length is 19....
This is why ...... you need to relocate the main ground wire away from THAT hollow Bolt. On my bikes, I have a ground field, Not just a single main ...
I have brackets or places for my E~50 Element on ALL 7 bikes. Wether they are in / attached to my Cravens, or Krausers. Mounted under my rack on the R...
ok gents, there is no hidden seal. in fact there are 2 seals under the whitish plastic reservoir. these are not so commonly sold with a rebuild ...
read a couple reviews using the word 'BEST' is a relative meaning