Last seen: 04/21/2024 14:50
Now you're talking. I really like making sure the enricher jet is happy by opening it up under way for a bit. I'll grab some Star Tron as well. Tha...
@wobbly Just to be clear, I followed your advice earlier this year and put the bike away with a bone dry tank. Pulled the float bowls and cleaned th...
@wobbly Yes! very helpful indeed. The /6 is going to have to wait it out until spring with a dry tank. I don't think I'll put Fluid Film in there. ...
Oops, I'm thinking about the 1976 R90/6 with the metal tank. I've been riding the PD (yes plastic) and will keep that on the road. But storing the /6....
yeah, the movie didn't upload. Here's an image. IMG_5096.jpg
@wobbly I tried the soap and didn't find anything, but I am lucky to have a plastic basin and could immerse the wheel/tire. Sure enough there were abo...
I think it worked! Kept the intake a generous .01 mm and a little less for the .2mm exhaust. Don't think it's a full .05 on the intake (the .02 won't ...
@wobbly Yes, I can't budge it either way. Guess I have to dig down a bit, break the adjuster free and see if I need to put in a spacer. Thanks!
"Wind the motor to 6,500 rpm..." I really like that response and punch myself for being a wimp. Might be my R90/6 goes along at much lower revs. Th...
Just came back from 300 miles over the weekend. feeling much better about this bike. Here's what I did. - Softening up that Corbin. They are just ...
Advertisement
