FORUM

Gerard Garra
Gerard Garra
@jagarra
Eminent Member
Joined: 08/24/2020 20:13
Last seen: 06/25/2022 14:00
Topics: 0 / Replies: 26
Reply
R90/6 recommended parts list when starting "ran when parked" restoration?

I had mine resleeved after I put new seals in and discovered it wouldn't hold pressure. I used Apple Hydraulics to insert a brass sleeve in the M/C...

7 years ago
Reply
R90/6 recommended parts list when starting "ran when parked" restoration?

I usually use a dealer for the carb stuff, good mail order outfit is A&S cycles, they offer free shipping. Your brake lever is going to the handl...

7 years ago
Reply
1975 R90/6 Electrical help- No start

The black wire comes from the horn button and goes to the circuit board in the head light, the other side which is also black goes to the horn. i ...

7 years ago
Reply
1975 R90/6 Electrical help- No start

An investment I have made for my BMWs is a big colored schematic. These are 11x17" colored and laminated well worth the price.

7 years ago
Reply
1975 R90/6 Electrical help- No start

That looks like an aftermarket flasher, the stock position is inside the headlamp bucket on the right side. Stock ones cost about $100.00. First t...

7 years ago
Reply
RPM vs. Speed

What speedometer ratio do you have, it's on the bottom of the face.

7 years ago
Reply
RPM vs. Speed

Here is a link to Snobum's info on speedo ratios for various rear end ratios. Since this bike was a European model it may have had a KPH speedo, mayb...

7 years ago
Reply
master cylinder piston

Stick with manufacturers recommendation, even though airheads don't have anti lock brakes, DOT 5 can give a spongy feeling brake. CAUTION: Do not...

7 years ago
Reply
master cylinder piston

yes,it is one piece. what some folks do is use one of those taper caps you get with a bottle of gear oil or that comes with a caulking tube to act as...

7 years ago
Reply
1980 R100 T, front fork problem.

On the triple tree insert a small screwdriver where the bolt was in the clamp edge to spread it a bit more. Place a 2x4 on tube before you whack it. ...

7 years ago
Forum
Reply
Bruno's Machine and Repair - Ontario: Status?

Facebook a good resource. I did hear a number of months ago that he was having health issues.

7 years ago
Forum
Page 2 / 2

Advertisement

Scroll to top