Yes, my 74 will flash with everything in the off position.

So I went to a dealer and that is what is listed under part number, also NLA. That info is from the description, I knew they were odd that’s why gett...

The part number is 07-119-907-643, they are available from I had to go there to get replacements for my 74 R90/6. I would get a complete set so I wou...

Here is another style needle that I have used that works really well to grease roller bears. You can slip it in between the rollers and grease them. ...

Your bike should have a 14mm M/C with a 40mm caliper. I had the same combination and the braking was poor, the lever took a lot of pressure and it wa...

If that rubber bumper is hitting on the second bar then you have the incorrect center stand. If you look at the fiche for this model the second bar i...

Maybe the problem is fuel flow being restricted. I would start with the fuel lines and pulling the petcocks to see if the filters are clogged. Fuel ...

If you have the .003" end play on the crank, that sounds like it may be correct. If you had the .125" that you say the shaft is not out far enough, t...

If i understood the prior conditions correctly, this issue with losing clutch adjustment happened before you took everything apart and replaced the cl...

Does your clutch rod have a step machined on one end for the release bearing to push against?

I am attaching a picture of the flywheel. The raised portion of it where the diaphragm mounts would have to be collapsing in order to create this con...

You indicated the issue started with the old clutch in there. If you replaced all the pieces of the clutch assembly and the still the problem is ther...

Great advice Wobbly. Here is an article explaining the differences between the tests from a motorcycle perspective.

Still not showing up. It is just under the pixels recommended. I can see it in my profile, just not showing up on any posts. Just under my name is ...

Having issues loading avatar. I have tried 2 different size pictures, looks like it is taking, getting update confirmation, but they just don't show...