Never been to Ireland, but I do know this.... If you are planning to visit that part of the world in late May 2019, then you would be absolutely i...

Now there's a couple different rattles from under the tank and that bugs me too, but one thing at a time. The usual suspect is the front tank moun...

When you set the ignition timing, you need to be right smack dab on the mark. Looking square in the hole and searching for the divot or line next to t...

I was surprised how interesting the Gold Mine Museum (on the square in downtown Dahlonega) really was. Skip the hokey mine tours and save it for the m...

You certainly could have. ► First, let's check the valve adjustment. Plugs out, gearbox in high gear, valve covers removed. Turn the rear wheel sl...

Well, now that I look it appears email addresses are no longer shown in the Profile for anyone. Not having PM on this forum is a bummer. Email sen...

Courtney - Congrats on finding that leak. Some other thoughts.... • IMHO, using the battery disconnect is a far better choice than charging the ba...

The tank is ~8" wide at its widest point, ~7" where it meets the seat. There's 10" of free space behind the filler cap and another 8" from the back o...

My favorite ride from Suches is actually north on Hwy 60 and cross over Hwy 76. Continue on and go west (left) onto Hwy 64/74 alongside the Occoee Riv...

So how wide is that flat area atop the /5 tank ? I have one of those Bilt micros laying on the shelf. One other thought... you want one of the newe...

• You don't have your location in your profile, so it's hard to tell if you are from out of town and really need showing around, or an old hand at the...

Went and made some measurements for you.... • New CorTech "Super 2" 10L requires 8 to 9" of flat surface width. • Bilt Micro requires 5" of flat...

The big problem for /5 and /6 owners is the height of the fuel cap. That will keep any bag from laying flat against the top of the tank. If you can fi...

MotorRad Elektrik seems to offer a custom rear-end panel of LEDs that plugs in and puts white light on the plate, but I haven't explored that. It's a...

Stacking washers seems to be a common solution. I don't know but maybe the rear mounts shrink over time. A friend's R75/6 is also wearing 2 flat washe...