R100GS Windscreen Hardware

These shots show the windscreen attachment hardware used on a 1993 R100GS BMW. The plastic fittings that support the underside of the windscreen are angled and need to be installed in the correct orientation as shown. I haven’t seen this info posted elsewhere and thought it might save me some time next time I or anyone else had the windscreen off.

You must be a member to view complete articles on this website. If you are already a member, you can log in here. If you aren’t a member yet, you can purchase a membership here.

Continue readingMore Tag

Hardware. Steering head, swing arm and wheel bearings. Screws, studs, nuts, bolts, clips, fuel fittings & hoses, center-stand springs, rubber parts, throttle friction device, etc.

This article lists & describes, hardware items for BMW Airhead motorcycles & may have errors. It was not possible to physically look at every part listed here. Parts numbers & descriptions were taken from a Snabb Katalog & checked against a 1995 printed Parts List (the last such ever printed on paper by BMW). Most were checked against my own stock of parts; some were checked against on-line fiche. A small amount of input was from others.

BMW on-line fiche is not as fully descriptive as some other types of BMW parts literature. Most of you will use the on-line fiche, which is generally adequate-enough. Here is a good source of such on-line fiche: https://shop.maxbmw.com/fiche/fiche.aspx

You must be a member to view complete articles on this website. If you are already a member, you can log in here. If you aren’t a member yet, you can purchase a membership here.

Continue readingMore Tag
Scroll to top