Can-bus is being discussed here primarily to give you some knowledge about it, even though it is not used on Airheads.
Can-Bus is the same as CANBUSS, CAN-BUSS, Canbus, CanBus). OBD means On Board Diagnostics. OBDII or OBD2 is the second version, in very common use now. Can-Bus MAY be associated with OBD in a vehicle, and it may not be.
Can-Bus is a method, hardware & software; to enable communications between ‘electrical & electronics things’ on your vehicle; these ‘things’ can also be mechanical, with electrical sensors. Can-Bus stands for Controller Area Network, & the ‘Bus’ part is explained later herein.
As you will see in the section on the future, it can do a lot more than just in-vehicle communications between ‘things’. While Can-Bus will be mostly discussed here, as it is installed by BMW in your bike (was not in Airheads), etc., the information may be similar for any system such as all the varieties of OBDII….all modern cars have such a system; & a diagnostic plug to access it. Can-Bus systems have the ability to transmit information between components at high speed, & to actually make changes in the operation of items. OBD can do some of that, but most think OBD is just diagnostic, retaining information in memory, until downloaded for diagnostic work, or such work can include erasing memory, modifying how systems work, etc. But, that is not really true ….it can be a serious part of actually operating the vehicle systems.
Continue readingMore Tag