FORUM

Matt Parkhouse
Matt Parkhouse
@778
Active Member
Joined: 08/24/2020 19:08
Last seen: 12/26/2023 12:36
Topics: 0 / Replies: 5
Reply
RE: New member intro and questions

My “best guess”? I’d clean things up and reassemble the engine. Swapping blocks is time/money intensive enterprise. If you can avoid doing it, you’re...

5 months ago
Reply
Pre-ignition on R60/5

I LIKE the slide Bings on the R60s...... When clean and nicely set up, they give a good ride. Stone-age simple too. My wife and I rode all over Euro...

8 years ago
Forum
Reply
Pre-ignition on R60/5

The R60s (and R50s) are known for carbon buildup in the combustion chamber. Get a pair of head gaskets and go to work. The British refer to this as...

8 years ago
Forum
Reply
Clutch Adjustment-

Check the clutch plate! New ones are 6mm thick. They are used up at 4.5mm. They usually work until 4mm or so. When you are measuring, measure the ...

8 years ago
Forum
Reply
Clutch Adjustment-

Check the clutch plate! New ones are 6mm thick. They are used up at 4.5mm. They usually work until 4mm or so. When you are measuring, measure the ...

8 years ago
Forum

Advertisement

Scroll to top