I saw this once before on an R90/6. In that case, the owner had the timing set to an extreme advance with the spark occurring closer to the F mark. Be...

When you pull the starter cover, it should be pretty easy to tell if the starter motor is somehow engaged with the flywheel and binding up the motor. ...

I had a similar problem on an R100/7. It turned out to be a stress fractured female spade connector in the block where the starter relay plugs in on t...

To re-stick your engine badge, use 3M emblem adhesive or 3M door gasket adhesive. I bought my tube at NAPA. Be sure to clean the mating surfaces well ...

First off, thank you for joining the Airheads Beemer Club.(ABC) Slow to return to idle when warmed up is an indication of a sticking centrifugal adva...

Well, I've never seen that before. If this were one of my bikes, I would try avoiding a crank replacement. The wire brush will not do much for you....