Last seen: 09/26/2020 17:52
The points wire looks a little worn and is pinched in one spot, so that's definitely getting replaced even though it had continuity when tested. Howev...
@wobbly that yielded nothing as well
@wobbly Still no spark either time. I've tested the condenser and its in good shape as is the wire connecting it to the points. They are getting a vol...
@wobbly This certainly helps. Yes I am using new plugs, and you were right about the placing in the coil 2 system. Both can spark now when I ground th...
Thank you very much for your response. I've done the tests that you listed. The ignition switch is supplying full power and coil #1 produced a feint s...
Yep, that was the issue, I adjusted them and thy work great. Thank you
Thank you very much for your response. I took your advice and cleaned the contact faces. The points move easily if pulled back, but always spring back...
Advertisement
