FORUM

Mark Creek
Mark Creek
@mark-creek
Eminent Member
Joined: 03/28/2021 18:40
Last seen: 04/06/2024 11:43
Topics: 7 / Replies: 15
Reply
RE: Midrange stumble

Well, all resolved. It wasn’t the wedgetail, it continues to work perfectly. It was a midrange jet issue. The problem was (other than the fact that I’...

1 year ago
Reply
RE: Midrange stumble

Thanks for your reply Richard. I like the music analogy, helps understand the perspective. I’m not sure it did this before the EI change. What I mea...

1 year ago
Topic
Replies: 6
Views: 341
Reply
RE: Adjusting needles on the bike

thank you all, richard, I appreciate your response and applied what you said. I think you misunderstood my response. You are awesome!

1 year ago
Forum
Reply
RE: ‘75 R90/6: New Wedgetail Ignition, no spark

thanks for all of your support. it turned out the iCU was defective. Tom Cutter instantly sent a new one, problem solves.

1 year ago
Forum
Reply
Reply
RE: Dyna 3 dual plug wire placement

I believe I’ve resolved my question; can someone confirm I’m on the right track$ left coil upper port wire goes to right cylinder, top or bottom...

2 years ago
Forum
Reply
RE: Dyna 3 dual plug wire placement

James, thanks for the response. Am I understanding this right; I can hook top and bottom plugs up to one side, for example the left side and then top ...

2 years ago
Forum
Topic
Forum
Replies: 10
Views: 370
Topic
Forum
Replies: 5
Views: 504
Reply
RE: R90/6 bogging down up to 1/4 throttle.

I just read a post you made elsewhere on this forum. Sounds like a Boyer is recommended, thanks for all of your help!

2 years ago
Reply
RE: R90/6 bogging down up to 1/4 throttle.

Thanks Richard, that helps a bunch. You mentioned that issue several weeks ago and the advance was cleaned and “it appeared” to be functioning but the...

2 years ago
Reply
RE: R90/6 bogging down up to 1/4 throttle.

Model is in the title of the post, R90/6. Its a 1975. i believes I have finally found the culprit an fixed that particular issue (float needle valve...

2 years ago
Reply
RE: R90/6 bogging down up to 1/4 throttle.

Ok I guess I spoke too soon and now the problem seems worse, happening consistent from idle including idle till I rev it high enough to get it past th...

2 years ago
Reply
RE: R90/6 bogging down up to 1/4 throttle.

Thanks Richard and David. i ride all winter (as long as no snow) and run ethanol free fuel exclusively. I even put 4 oz of aviation fuel in each...

2 years ago
Page 1 / 2

Advertisement

Scroll to top