I ended up squirting some electronics cleaner in the turn signal switch, even though I'm waiting for the new one I bought from MaxBMW, that "fixed" th...

By the way, just joking on the long forks. This ain't 1969 and I ain't Captain America. That's OK, I'm not Jack Nicholson ! 😛 • You need the ...

• I believe the installation of the PR tubes that we've been discussing is common to all /5 and later Airheads. • Most of the LocTite thread locker...

It used to be standard shop practice to drive the PR tubes into the seals 1 or 2mm rather than replace them at the first signs of leakage. Trouble is,...

Again, referencing the schematic I made up.... Flasher Schematic for Reference Thanks for the video. From it we can see... • Both flasher pod...

I guess my over zealous charging fried Old ecu . It's actually a lot more likely that the thermally conductive "heat sink" paste gave up due to ...

No more worries about transmission problems or wrist pain. Now it's just throttle elbow and I can live with that. Wrist, arm and hand pain could be...

I placed the rim of the "top hat" on the outside (under the screw head) and it bolted up very nicely. Don't snug-up anything until all the fasteners a...

I'm having a very similar issue with my 71 /5. I took it out for a test run yesterday. I noticed that the signals weren't working, but the generator...

► I added additional lights to the rear of my bike and made all the connections inside the tail lamp using common male and female 1/4" spade connector...

Ted Porter at Porter's Beemer Shop is really good on 2-wheelers, but you may need a sidecar specific source.

Other info: This is a 1974 R90/6 with no kick start. The neutral switch was replaced with a switch for a 1994. This could have had the transmission c...

Wondered about opinions on clutchless shifting. I have a 1984 R100RT and have put about 1000 miles on it. This is my first airhead. I have been riding...

Trick is that the appropriate gear with the broken dogs may be available new but is horrendously expensive. I know what you're talking about. I'...