Last seen: 07/12/2025 03:57
Some questions. Help will continue as long as you answer every question. • Question Number 1: Were the plugs being blackened BEFORE you started thi...
ARRRRRRRGH! While we generally try to encourage our fellow Airhead owners as much as possible on this board, I feel it my duty to point out that Na...
On a car they call it the Exhaust Gas Re-circulation port, or EGR. BMW may have another name. A small sample of the hot exhaust gas is shot back into ...
In about a week, videos of the 2019 ride will start to appear on YouTube and the DGR web site. Look for them. This is a very impressive organization.
I've found that Max is a bigger operation and more likely to ship a part immediately. While Bob's is much more oriented toward personal service. Y...
Thanks for the reply Wobbly. That is just what I was thinking, replacing the floats and needles . What's good place to source the parts? Is there som...
Welcome Aboard ! 1) I highly suggest you replace both floats AND both float needles for starters. There is no way of knowing if you have the update...
Welcome Aboard ! Assembling the choke parts into the wrong carb body is a recurring issue. This is why we advise everyone to rebuild one carb at a ...
The horn has its own relay. The Starter Relay and the Horn Relay may use the same power source (a common fuse), but the horns are not using any part o...
If you send it out, then you need to make sure the repair facility has the ability and track record to cut the circlip groove and install the clip. It...
We still need a year and model to get more specific. Scot covered a lot, but he's going on your diagnosis of not enough fuel entering the carb. An ...
Others will reply, but 1988 was one of the years that needed the circlip added back to one of the shafts, I do believe. That could be your whole issue...
Needing the space helps explain why the wires were fooled with at the outset. And that's worth something. We're sitting on the trailing edge of the...
Bings have been known to mark their territory.
Turn signal on the Left may be a DOT requirement now.
Advertisement
