If you want reliability, then I suggest moving away from the pointy-end German fuses to the modern "flat pack" fuses used in cars. And using them mean...

Oil pressure switch leaks are a recurring issue. This exact switch is common to a lot of German vehicles made around the same time, so it might be pos...

You can get the OEM part online from Max BMW web site. Other hardware sources, like McMster-Carr, sell metric crush washers for almost any size dra...

Delighted we could help ! Enjoy your riding season.

Sir, I sincerely apologize if I have offended you. I assure you that while I have indeed reached the point of exasperation in the 4 hours I have spent...

But first you need to make sure the master cyl is performing. If it performed BEFORE you did the hose replacement, it should work properly now. This i...

2) Remove the hose or tube from the rear of the m/c at the output. Lay your finger tip over the output and use it as a one-way valve. VERY slow motion...

Anything you can do to make the front of your bike stand out against the background of other traffic will pay big dividends. Almost 3/4 of all motorcy...

I agree wholeheartedly with staying off the Interstate. • You won't be forced to ride the prevailing speed of the traffic, which is probably faster ...

My 1979 has the same problematic rear brake. Works great, but man, oh man is it complicated. Complicated to build and complicated to work on. So if it...

If I was to question myself or attend a tech day that is of a reasonable distance, is it common for people to trailer?? I really believe the "pro...

OK, I finally dug up the tape I used. Sorry it took so long. It's Scotch (3M) "Extreme Mounting Tape" and has a red backing and is 1" wide. This tape ...

I think #7 IS the adhesive backing. I feel your pain, brother. I did a repair on an R75/6 for an acquaintance. Got it running after long term stor...

The humorous answer is this..... You are allowed to trailer it the first time. But if the guys get it running really good, then you had better ride...

• The secret is really in the surface prep. You should remove ALL the old adhesive from the plaque and starter cover. Scour both parts really well so ...