FORUM

Richard W
Richard W
@wobbly
Member
Joined: 03/05/2016 17:59
Last seen: 07/22/2025 05:40
Topics: 91 / Replies: 2570
Reply
Cyclops LED headlight R80/7

Wobbly. Thank you for the info. I’ll check the forum for other posts. But my concern is about the heat generated and how to get rid of it. Eric...

6 years ago
Topic
Replies: 2
Views: 2614
Reply
R100R Mystic Speedometer

The speedometer and odometer are 2 distinctly different instrument parts. The speedometer needle "wandering" can be cured with a fresh application of ...

6 years ago
Reply
Transmission drain plug stripped.

Thanks Wobbly! Very good suggestion to epoxy the plug in. I may go that route for now. Hank - You might get used to this oil sucking idea and n...

6 years ago
Reply
Cyclops LED headlight R80/7

This subject has been covered on multiple times on this forum, but here's a quick synopsis.... • All H4 replacement LED headlamp bulbs (that I have...

6 years ago
Reply
Transmission drain plug stripped.

On any repair that involves tapping new threads into the case (oversize thread, Helicoil, weld and re-tap), the answer to your question will be determ...

6 years ago
Reply
New member. Engine and carbs sitting on workbench, pics attached, now what??

The Engine Control Unit (ECU) is mounted on an aluminum heat sink, and the heat conductive paste between the two can dry out and allow the ECU to over...

6 years ago
Forum
Reply
New member. Engine and carbs sitting on workbench, pics attached, now what??

Mike - That was one of the biggest shocks to my system after coming to BMW. Some dealers will prepare small kits, but BMW seems to sell everything by...

6 years ago
Forum
Reply
New member. Engine and carbs sitting on workbench, pics attached, now what??

Welcome to the ABC ! Sorry to disappoint, but nothing needs to be done to your Airhead engine or clutch except put it back in the frame and ride it...

6 years ago
Forum
Reply
Introduction / New Member

Welcome aboard ! • Leaky master cylinders are a common issue since they are out of sight. Yours look to be way more than pitted cylinder. It appear...

6 years ago
Reply
The Good News - I bought an airhead today - The bad news - It has no keys

Having gone through this last year, the experience is fresh in my mind and I cannot say DIY will lead to an all together pleasant time. • New igni...

6 years ago
Reply
Dual to single horn swap

Your horn swap made me think back to the 1970's for some reason. I had a riding pal back then that described his main goals in life as "Root, Toot, Po...

6 years ago
Forum
Reply
82 R100RT Break Pulsing Badly

By all means try Scot's suggestions first. If for no other reason than that brake rotors, even third party, are NOT cheap ! If it does come to roto...

6 years ago
Reply
Dual to single horn swap

You should be able to simply fit the single horn in place of one existing. Don't tape off the unused wire. It will become exposed at some point in ...

6 years ago
Forum
Reply
82 R100RT Break Pulsing Badly

IMHO you'll need a dial indicator to detect warped rotors, which your issue certainly sounds like. Tire balance is more of an "at speed" issue, with o...

6 years ago
Page 112 / 178

Advertisement

Scroll to top