Zinc-ZDDP, or lack of it, will not cause lead fouling of plugs. Zinc protects flat tappets. This means cam shafts and followers. I don't think you wil...

That's for that ! I agree, Katdash is rather unique. I do have a broken flex circuit in my 1988 and was intrigued. What was the general price range...

I'd suggest you look at the Givi line of windscreens. Givi products are well made and generally a cut above the normal me-too type motorcycle accessor...

All the bulbs I needed came from the automotive bulb section of Super Bright LEDs...

You need a GPS that will export the voice via Bluetooth or direct plug. You will never hear the voice from the speaker with all the wind noise on a mo...

There is a nearly identical thread on this subject. After that I replaced my speedo and tach with green LEDs and the difference IS amazing. Try a blue...

If you'll calculate the RPM of the wheel bearings at 100 MPH (a speed you'll agree is ridiculously uncommon) you'll see that it's running quite a bit ...

Ted Porter at Porter's Beemer Shop carries a wide lineup of shocks, and Works may be one of those. He is definitely one of THE guys on BMW shocks. ...

I ended up squirting some electronics cleaner in the turn signal switch, even though I'm waiting for the new one I bought from MaxBMW, that "fixed" th...

By the way, just joking on the long forks. This ain't 1969 and I ain't Captain America. That's OK, I'm not Jack Nicholson ! 😛 • You need the ...

• I believe the installation of the PR tubes that we've been discussing is common to all /5 and later Airheads. • Most of the LocTite thread locker...

It used to be standard shop practice to drive the PR tubes into the seals 1 or 2mm rather than replace them at the first signs of leakage. Trouble is,...

Again, referencing the schematic I made up.... Flasher Schematic for Reference Thanks for the video. From it we can see... • Both flasher pod...