FORUM

Richard W
Richard W
@wobbly
Member
Joined: 03/05/2016 17:59
Last seen: 07/06/2025 10:04
Topics: 91 / Replies: 2567
Reply
'95 R100RT: Stored without oil

Welcome Aboard ! Well, let's consider that the oil level is well below all the running parts of the engine. Therefore, ALL stored BMWs are stored w...

5 years ago
Topic
Replies: 1
Views: 965
Reply
Does ABC Have A Tool Loan Program?

I previously replaced my rear main seal using "regular' tools, but it doesn't seem to be holding - there's a little bit of oil dripping off the rear s...

5 years ago
Forum
Reply
Advance Unit - When do I know it's shot and needs replacement?

Hey, congrats ! The points ignition is very rugged and reliable... if you'll keep that advance unit serviced. If the timing is "in spec" then that'...

5 years ago
Reply
Vibration R100GS

I'll second all Scot's suggestions. I once had an 1988 RS that was extremely buzzy in the bars and foot pegs. I did a basic tune-up with timing and ca...

5 years ago
Reply
R100RS, R90S rear brake master cylinder

I had a hard job driving the piston in the master cylinder out as it had obviously been dry for a long time. But with a bore cleanup the new pistons w...

5 years ago
Reply
Advance Unit - When do I know it's shot and needs replacement?

No chance to work on it at moment. Essential business and all. You just tell them at work that the directors of this Club have designated Airheads ...

5 years ago
Reply
Advance Unit - When do I know it's shot and needs replacement?

Held in your hand, Yes the auto advance unit will feel sloppy and floppy.... It's how it feels mounted in the motor in the running position that count...

5 years ago
Reply
'74 R90/6: left cylinder after or back firing above 3k rpm

• 125psi is not great, but it's respectable. Carbs were off while doing this ? • What about the valves ? Are they correctly adjusted with .004 and ...

5 years ago
Reply
'74 R75/6: Mixture screw and a few other questions

It's the older, stock OEM spark plug caps and wires you'll want to worry about. They seem to go out at about 40 years. Read this...

5 years ago
Forum
Reply
'74 R75/6: Mixture screw and a few other questions

More mixed thoughts.... • Highest idle speed is the ultimate goal when setting the Idle Mixture Screw, but you're not going to get that until the e...

5 years ago
Forum
Reply
‘76 R90S. Electrical issues.

Here's the biggest mistake owners can make.... Whatever is going on on one side, is just miles away from happening to the other. So if you have one...

5 years ago
Reply
1989 R100GS Frame Question

While I am writing about the frame, is there (are there) fork suspension re-valving options for this bike to improve the front suspension ? I believ...

5 years ago
Forum
Reply
'74 R75/6: Mixture screw and a few other questions

Some mixed thoughts.... • The Bing enricheners are a constant issue. Not only can they be reversed, but they can also be swapped Left into Right, c...

5 years ago
Forum
Reply
'92 R100R: front brake pads

Welcome Aboard ! • Brake Pads: A company called EBC seems to be the leader in the motorcycle disc and brake pad world. If your rotors are warped, t...

5 years ago
Page 79 / 178

Advertisement

Scroll to top