FORUM

Richard W
Richard W
@wobbly
Member
Joined: 03/05/2016 16:59
Last seen: 11/17/2025 03:21
Topics: 91 / Replies: 2607
Reply
Torquing drive shaft bolts

• You might check Snap-On and other high-end tool sellers for an extended "Crow's Foot". That's what that tool is called. • You can skip the fanc...

6 years ago
Forum
Reply
6 years ago
Reply
R100RT missing out at idle.

Welcome Aboard ! The jets most prone to clogging due to storage with aged fuel are, of course, the smallest ones. The smallest jets are for the idl...

6 years ago
Reply
RS / RT Engine guards

Glad to send you the set I removed from my 1979 RT, but those had to have holes bored in the fairing.

6 years ago
Reply
Carburetor balancing

Thanks for the response Wobbly. I did attach a Carbtune (manometer) again today and discovered I needed to do quite a bit more tweaking of the thrott...

6 years ago
Forum
Reply
Carburetor balancing

Welcome Aboard ! You'll want to... • Run fresh high test namebrand fuel • Strobe time the ignition at high RPM • Check the diaphragms in the ca...

6 years ago
Forum
Reply
Defective Benchmark throttle cables?

Dave - I've never heard of Benchmark, but I'm not surprised because we live in different areas. When I did a Google search on "benchmark BMW" it retu...

6 years ago
Reply
Defective Benchmark throttle cables?

Let me tip-toe around this very carefully.... My friend, you don't have a bad set of BMW cables, you have a bad set of Benchmark cables. Send them bac...

6 years ago
Reply
Poor gas mileage on 1975 R90/6

Welcome Aboard ! On ALL vehicles with carburetors, especially older ones.... • The quality of the air filter is THE number 1 key to good fuel econ...

6 years ago
Reply
'79 R65 Combination switch turn signal on right

Bob - Sorry hear about your woes, but glad to hear you're back on the road. One thing I don't understand... are you saying your harnesses are now OK,...

6 years ago
Reply
/5 Headlight bulb upgrade

I've found P45T adapters that allow use of more common P43T base halogen lamps. A link to the adapters would also be nice.

6 years ago
Topic
Forum
Replies: 1
Views: 1697
Reply
'74 R90s Clock Stopped Working

• There can't be a world of difference internally. I was thinking you might be able to replace the internal mechanism and use the original face and ha...

6 years ago
Reply
'74 R90s Clock Stopped Working

The clock has a quartz movement and is therefore very simple in design. When they stop they have typically reached end of life. Look for a complete re...

6 years ago
Reply
More Timing Mark Questions

Why does this system work ? It's a funny quirk of the 4-stroke engine, but once every 720° of crankshaft rotation, both valves are open for a very bri...

6 years ago
Forum
Page 96 / 180

Advertisement

Scroll to top