So here are my final settings in case anyone cares... Neddle Jet was: 2.64 changed to: 2.68 (as per earlier models) Main Jet was: 160 ch...

I got 2k miles on my '84R80RT and she handles good in the fast sweepers and switchbacks 2-up in the Pa. mountains. But the front end bounces distract...

Added 2 photos to first post.

One other kind of weird thing though, was that I had to charge up the battery as it had been drained down to below 8 volts. So something must have bee...

W/ ref. to your above statement .... some may think that if LEDs are used it's ok to swap wires to smaller gage ...... hum hahah. It's a fact. L...

ATF or any one of the million WD-40 like thin oil penetrants.

It's worse than that. My wife bakes cakes professionally. Her support forum is warning pros not to make cakes with football team mascots, corporate or...

I love your ground cable attachment upgrade! That is pure genius. I have considered routing mine to one of the starter mounting bolts, ala automot...

What has been so eloquently contributed is great, but may be somewhat dated. Two points... ► First, I prefer to teach charging systems using the me...

The last time this happened to me the bolt holding the shift lever in place had simply come loose. 🙂

Thanks for the reply. I am a little confused by your reply though. You said that the majority of motorcycle use radial bearings, then say I might rec...

I looked on the Woody's web site and didn't see any mention of a bearing conversion. Two comments.... ► Although there are sealed tapered roller ...

I ended up buying a 60 inch starter cable (with 5/16 eyelets on each end) and cutting it in half, since 30 inches seemed to be the correct length. The...

They seem to use a low profile fitting on the brake pedal for safety, but that fitting can be removed with a 4mm socket. The hole can then easily be e...