When I opened it up one of the brushes was pretty much gone so I'm confidant that was the problem. Now I need to get the soldering iron out to remove ...

The brushed arrived, I'll get them installed and see where I'm at.

Thanks for the offer but I ended up ordering some from Bob's. I needed a couple of the rubber plugs the go in the engine case where you look for TDC. ...

Ok, thanks for that little guide to the gauges. I'm hoping I don't have to dig into that. Any thoughts on the best place to buy brushes?

All of the terminals are good, I checked that when I was trying to fit a new battery. I'm not sure the "gen" light is coming in, there are a couple of...

Nobody interested? Now hoping I can still make a go of it despite work.

I'm using a Mosko Moto Nomad now Nomax on 3 bikes with a 4th to come. I really like how it's set up with organizing pockets etc. I use it on my KTM 64...

Hey Yves, I have to let you know that Montreal west is not "across the country" You've missed a third of our nation. Just saying'. 😜

That's not a bad idea. That's the 2nd time I've done it to myself with numerous results. The other day my carb was leaking so I pulled the float bowl ...

Good to have a little look around as it hasn't been on the road in some time. But the idiot in me forgot to check the kill switch first! Oops. In my d...

I did not unplug the connectors just gave them a look. I think I have a spare starter relay that I can check.

I took the cover off to have a look and that connector is totally good, zip tied in place and solid. Everything else in there looks fine and all other...