Last seen: 10/01/2024 16:12
This is the same advice Wobbly gave me about 3 years ago along with other help. It's was the single most beneficial advice I received here when I wa...
I don't have that setup. I have seen them for sale on ebay and the adventure airhead site. Sorry I couldn't help you with it. John Young P.s. If ...
Do you have a picture of what your looking for? I have a bmw rear rack and passenger backrest. I also have 2 different sets of luggage racks. I have ...
WOW! Congratulations. Enjoy your new bike.
It helps my shifting on my 1985 r80rt to practice preloading the shifter slightly prior to pulling in the clutch at the given rpms mentioned earlier. ...
I learned about Deoxit from this Airhead forum. As suggested I've applied it in steps and have gone thru almost all my electric connections from headl...
I was able to reassemble the switch after studying it awhile.
Hello Richard, It's been awhile since I've been on here. On the older post regarding the Mac oil pan you mentioned you had an extra one. If this is ...
I ended up not king into the bean can. Didn't want to do any irreversible damage. It looks pretty good. The white connector is solid. After reviewing ...
@wobbly, Thank you for the clarification on the wiring. I was relieved to see that 3pin connector intact. I would like to request your thoughts...
This evening I was able to remove the bean can. On the first picture looking at it closely it looks like the white connector is in the same wiring as ...
Thank you for this help. I will keep posting with my progress.