Welcome aboard. I'm in NE Georgia and you're welcome to stop by anytime. Choice of a bike is very personal matter. If you could tell us where your...

If you remove the rings, piston pin and circlips (everything that's ferrous) then there should be no harm in cleaning the aluminum piston any way you ...

You know eventually these will dry up and not be available This is very true. The 1981 R100RS model dried up and became unavailable decades ago...

I can't help directly, but here are some optional suggestions... call Boxer2Valve and see which lines they use, OR a local hydraulic hose maker could ...

Guaire - Sorry to hear of your "whack". Glad you are OK and still with us. Scot - Great advice for all of us. Thanks.

I know little about the circuit board itself. I imagine it is similar to other printed circuit boards that can sometimes be damaged from over heating....

Hi and welcome. I'm far from a /6 expert, but I will try to help. • Power is delivered via Red wires (plural becasue it is multiple wires and conn...

Just to close the loop, my New Year's Day project was to disassemble and inspect the starter relay and voltage regulator, both of which appeared to be...

Thank you VERY much for sharing. From their appearance (very oxidized silver) both my regulator and relay appear to be OEM, but untouched by brake flu...

Oil in the galleries going to the valve gear probably did back-flow to the sump during the storage and work periods. All liquids seek their own level....

Believe I have what you describe as a mini-cube starter relay w/silver cube about an inch square underneath master cylinder. Care to expound? "Mini...

... but my question now; is it possible to lose prime at the oil pump? Rodney - Certainly no expert on the subject, but I suspect there is nothin...

Gremlins can indeed be hard to find. Some suggestions... • Be prepared with extra fuses and a test lamp, should the worst happen out on the road. P...

I never had this much trouble with my Kawasaki Concourse. Help ! This is becasue the Concourse probably is fitted with electronic fuel injection, w...

Wobbly, that looks like the lift I've seen. But, I didn't know it had a back door wheel drop out. Most of the "flat work area" type lifts do have t...