Jim - The headlamp is the single largest user of power in the entire OEM electrical system, so that's where you want to start. Obviously, changing t...

I'm not exactly sure when the various OEM alternator improvements were introduced, but I imagine that you are going to be cutting it fairly close. Und...

• And did you swap ALL the OEM flexible brake hoses over to those with braided stainless steel reinforcement ??• I agree, single piston calipers will ...

• If you are not presently using, then as a first step I would recommend changing the gearbox oil to a multi-grade synthetic, such as Valvoline 75W140...

I don't believe it's on DVD yet. Neither is the quoted website up yet. You'll need to Google "last motorcycle on earth".

What year and model, please ?? It seems vaguely familiar. I believe it goes inside the soft rubber air intake snout to insure it stays in place. Tha...

Rory - Here's a photo of a clean board which can guide you.... TIPS • The final wiring is so jumbled that a photograph of the wired board...

Great news.

If your old pads have worn at a strange angle, then you might want to install a new pair. If you don't know how old your pads are, then you might wa...

That's good news ! Congrats.

My guesses are: • The clutch may be slipping. Despite all appearances to the contrary, please check for free-play in the actuator arm. • Idle set...

If this is a hex nut, then you must use the correct fitting 6-point socket. Most socket wrenches are 12-point. A 6-point socket gets a much better gra...

A set of Airhead brushes can be purchased very easily for a minimal ~$5 fee. Of all the Airhead repairs you can do, this one is one of the very, very ...

NOTE: It is very nicely sealed, to prevent rain and wash water from killing your 2 gauges. Unscrew the speed drive cable from the bottom of the spe...

I have tried that, and the problem is not what you'd think ! To do what you describe, you'd need a generic automotive battery cable... which are avail...