FORUM

Richard W
Richard W
@wobbly
Member
Joined: 03/05/2016 16:59
Last seen: 11/18/2025 05:55
Topics: 91 / Replies: 2608
Reply
seat for R75/6

Having restored several bikes, allow me to make this observation.... If you think your seat is stock, then the first thing you want to do is remove th...

7 years ago
Forum
Reply
led headlight upgrade

If you'll pull up the photos of both bulbs, you'll notice the Motoled 2X2000 has its illuminating chips mounted on a FLAT circuit board. That means on...

7 years ago
Forum
Reply
Headlight Bodge

I really don't think the large 190mm BMW bucket and/or rim will accept the more common North American 7" reflectors. The new prices are HIGH, but they...

7 years ago
Reply
R75/5 Replaced failing battery, now won’t start...

Simple oversights happen to the best mechanics. This is why you want to do your own work. Now you know it can happen and from now on you'll be extra c...

7 years ago
Reply
My R100 shuts off at idle or low speed. Will re start but, it’s weird.

It still sounds like a low voltage condition to me. Have you measured the battery voltage (on the battery posts, not the cable ends) at different RPM ...

7 years ago
Forum
Reply
quietest mufflers?

The ones by Mac are one step louder than stock, without being "throaty" or obnoxious. I have not heard the Emgo mufflers yet. Actually, any stock ...

7 years ago
Reply
My R100 shuts off at idle or low speed. Will re start but, it’s weird.

What type electronic ignition have you got ? Some are very sensitive to low voltage conditions or intermittent connections. The issue varies by brand....

7 years ago
Forum
Reply
led headlight upgrade

I've been running the exact same bulb for 2 years now with no ill effects on anything. The headlamp shell is not air tight, so there's enough air exch...

7 years ago
Forum
Reply
Period correct engine paint

That's just my bad memory. I wouldn't do anything rash just yet. Besides 95% of the people looking at the bike don't know either !

7 years ago
Forum
Reply
Prepping for the pushrod seal replacement - 78 R80/7

To me your question raises an "it depends" answer. Since they run so cool, Airheads don't typically experience excessive piston ring wear. That mea...

7 years ago
Forum
Reply
Period correct engine paint

Welcome aboard ! Other than the "motor emblem" which disclosed the model information along either side of the starter cover, I think you're correct...

7 years ago
Forum
Reply
What's best lead substitute product for fuel additive?

One important note I forgot to add.... If you have access to "aviation fuel", that is very high octane and still contains lead for the valve seats....

7 years ago
Reply
'74 R90s Neutral Light Comes On When Clutch Lever Squeezed

Again, my thanks. Being electronically challenged... A common affliction, more prevalent than once believed. You're simply working in the fiel...

7 years ago
Reply
fast idle

After all of this, sometimes we see that the idle speed was intentionally set high becasue the idle mixture screw is no longer working. This is a cons...

7 years ago
Forum
Reply
What's best lead substitute product for fuel additive?

â–ş Your bike will run fine on "high test" unleaded ethanol fuel. High octane unleaded ethanol-free fuel is even better. (A lot more of this is showing ...

7 years ago
Page 123 / 180

Advertisement

Scroll to top