Last seen: 11/20/2025 03:12
I would NOT disassemble the final drive. Pull on the plug with a pair of Vise-Grips while turning and it will come out. Tap on the pliers if neces...
One other thing Wobbly... You gave me some good advice earlier about getting some of those odd 8A fuses. I would have thought Euro would have them. Wh...
Those numbers were achieved using the engine oil pan retaining screw torque, but reduced ever so slightly because those 5 screws have less thread enga...
I do not hold Euro MotoEletrics responsible for the shipping delay. [snip] Again my question is has anyone else experienced delays in shipping with Eu...
If you are talking about the 5-bolt wheel bearing covers, then something like 6Nm or 4.5ft-lbs. That's roughly what a normal person can apply with a 1...
Here is as good as any place !
Sorry you're having a hard time, but you can hardly hold Euro MotoElectrics responsible for what the US Postal Service is doing (or having to do) in a...
Simply gorgeous !! Be sure and measure the exposed length of the needle. That should be the same for both carbs.
All the newer manuals seem to cover multiple models, and so there's generally going to be more info than you need in most of them. I have a Haynes and...
Steven - Welcome aboard ! • Let me encourage you to convert to the braided brake lines in place of the factory "rubber" lines. They add a lot more...
Radio Shack and Home Depot stores have sold this stuff in the past. I'm still working on a tube my son bought to lube his AirSoft gun 10 years ago ! I...
I'm truly glad that you've conclusively narrowed the issue down. Some last thoughts... â–ş The most common issue ethanol fuels cause is clogged jets....
Hi, and welcome aboard ! Very nice looking bike ! Well worth your efforts. Congrats !! I'm no expert, but will try my best to help... â–ş Yes, JB ...
Advertisement
