Jerry - Sounds like you have a big adventure planned. Wish I was going with you. One of the leaders within our local group has cancer and was plannin...

Do you think it's ok.... • Do I think that's the highest octane available to you ? No. • Do I think your engines will sustain permanent damage ? No....

I have replaced hundreds of fork seals, but never on a BMW. If I understand your question correctly, you are asking about the reason for the void unde...

Thank you. The red o-ring is white, the red is gasket sealer applied. Ah, thanks for the correction. My bad eye sight. Your existing oil filter w...

• There are several excellent brands available, but EBC seems to be the leader in the motorcycle market. • If you have dual front discs, then you'...

Those type "speakers" are usually representatives of a specific product's Marketing Dept. As such you're not going to get as un-biased assessment as y...

• That nick is nothing to worry about • Did you moisten the lip of the seal before installation ? Put some grease on the shaft maybe ? • It's go...

It would need to be more than a "nick" to leak like what you're describing. More like a gouge. No, I'm fairly certain that your oil seal was not cente...

As I understand your issues from the photo above, you seem to have a superfluity... Looks like the PO broke the aluminum oil filter cover, so he ba...

I believe Kisan did it that way for several years. Yes, it's very slick, but the BMW has limited room behind the bulb due to the circuit board. And i...

The 3 main makers are Kriss, Kisan & Signal Dynamics. Been a long time since I looked at one of these, and they've gotten really fancy. Now the...

I've been running a modulator since your bike was new ! I love them, and I won't ride a bike without one. I like to find the wired version (a lump ...

Thanks for the note Wobs. I concur with your comments. Turns out the oil was from the trans input seal. Just changed the trans oil so it was clear/cle...

So just one more question on the relay AMP ratings. Am I OK at 30A ? Oh yes ! That's a very good thing. The higher current ratting refers to the cur...

1) and 2)..... I would certainly do a compression test before I tore the top end off to replace rings "on a whim". Meaning low compression would be p...