I haven't developed an ear for what I think a good idle is. I'm playing by intuition and RPMs. This is after the bike has been warmed up. Do you guys ...

Yes, you can take one of your troubleshooting jumpers and jump from the relay terminals with a Red wire and then connect the other end to the ignition...

My cat wants to join the conversation. But I warn you, she can't type and knows absolutely nothing about elec-trickery.

This one is so common, I think it's become a rite of passage for Airhead owners. There was the time I inadvertently hit the Kill Switch when pulli...

I bought some work boots that were good to wear for riding.... at least I thought so. However, not once but twice the raised shoelace eyelets managed ...

I bought some work books that were good to wear for riding.... I thought. However, not once but twice the raised shoelace eyelets managed to pull the ...

You're not quoting any numbers on the charger or the battery, so I expect your results were simply a happy coincidence. That is to say, I hope you're ...

So exactly what voltage and current does it output ?? If it's ~14.3V and below 1A, then you can couple it with a common lamp timer to automatically...

From your messages and photo, in my professional opinion, you need to simply buy a new harness. Someone has been butchering on the present harness tha...

All members have access to these forums and your thread. Not all members view these forums. Not all the members who view this thread choose to res...

• The RED wire is "hot" all the time and straight from the battery. When the relay is in place you should have 12V on both RED wires at the relay sock...

I'd say adjustment while running normally is always preferable over having one cylinder drag the other dead cylinder along. How would you compare the ...

This one was cheap, if I had cash I would have seriously considered it even though I hate that shade of yellow. Friends don't let Friends ride ...

Several things.... • There's no need to start a new thread. Keep ALL your correspondence about this problem in one single thread, PLEASE. You ne...

Do you think I can tighten up the forks so it won't clunks. I think you can load the bearings with new grease and set the pre-load on the steering h...