• I concur with 8053's answer. Especially the part where he concurred with me. 😉 • Your location must be Canada since you are talking dollars an...

Just some random thoughts.... • There were incremental, but noteworthy updates between /6 and /7. Later is gooder. • The /7 has the equivalent of 63...

► In the state of GA you can get the "Historical Plate" (that's the equivalent of the Antique plate in PA and elsewhere) for free when you register a ...

Whereas the BMW discs are riveted solidly to their hub, the EBC discs (like so many newer discs) are attached to the hub with metallic spools which al...

Anyone know the specific procedure to use, to determine what caused the bearing to fail? "Airhead CSI"? For example, if we know how the oil flows,...

Bret - ► I agree with the new needle and new needle jet idea on a bike with those kinds of miles. However, some of the 40mm carbs don't allow you to ...

I do believe the front left rotor and the rear are the same. (The only difference in the 2 fronts is the drilling.) The part number fiche can tell you...

Welcome Aboard ! Gorgeous bike, and one of the best years too !

Just thinking, with a bike that old several of the greases are going to be oxidized and nearly worthless. If the grease on the splines was past due, t...

YouTube video is at...

That's really a shame. 1) I'd cancel the credit card payment or stop payment on the check immediately. Shops are not infallible, and any shop too ...

Welcome Aboard ! Wow ! That's really special in several ways. It's always nice to get a hand-me-down from your dad, but that's an exceptionally nic...

New copper core plug wires and NGK 5K Ohm plug caps are the cheapest upgrade you can make. All totaled the bill was something like $15. If had started...

Things are shaping up !

Many thanks for that !!