Many thanks for that !!

Please don't judge the Boyer by the issues I had. My bike sat for 10 years before I picked it up. It had to be gone over from stem to stern to get it ...

I have run a Boyer digital for the last 2-1/2 years. I love the thing. Did have some initial trouble because I installed the digital (red box) ver...

Welcome Aboard ! In checking over your new ride, there's several Airhead specific and general safety tasks you'll want to complete... • When you...

Is that an after-market alternator stator, because the red wires sure aren't stock ! I'm just wondering if those stator wires have given trouble in th...

I would NOT disassemble the final drive. Pull on the plug with a pair of Vise-Grips while turning and it will come out. Tap on the pliers if neces...

One other thing Wobbly... You gave me some good advice earlier about getting some of those odd 8A fuses. I would have thought Euro would have them. Wh...

Those numbers were achieved using the engine oil pan retaining screw torque, but reduced ever so slightly because those 5 screws have less thread enga...

I do not hold Euro MotoEletrics responsible for the shipping delay. [snip] Again my question is has anyone else experienced delays in shipping with Eu...

If you are talking about the 5-bolt wheel bearing covers, then something like 6Nm or 4.5ft-lbs. That's roughly what a normal person can apply with a 1...

Here is as good as any place !

Sorry you're having a hard time, but you can hardly hold Euro MotoElectrics responsible for what the US Postal Service is doing (or having to do) in a...

Simply gorgeous !! Be sure and measure the exposed length of the needle. That should be the same for both carbs.

Needles that is, not jets The Needle Jets are easily replaced at any time by simply popping off the float bowl and then extracting the Main Jet hol...

All the newer manuals seem to cover multiple models, and so there's generally going to be more info than you need in most of them. I have a Haynes and...