Last seen: 05/03/2026 05:22
8053's description matches what I have found. Screw the cable end adjuster back onto the cable sheath, then re-install the adjuster back onto the carb...
Two new discoveries: • The rear wheel has about 0.020 inch movement at the rim. Not enough to damage the ring and pinion final drive gears, but e...
So does EPCO make a stainless steel exhaust pipe set for the RS ? They list one for "R100R and Mystics" which seems to be correct. This set also seems...
Interesting report. But there's no need to need to wait until the equinox, we have a Solar Eclipse on Monday, Aug 21 cutting across Tennessee and Sout...
► If I have the "story" correct, originally the diode board was mounted by rubber, vibration-type mounts which turned loose after years of service. Th...
Sounds like maybe your ignition switch has given up and exploded internally.
Maybe I could safely make the move to Valvoline synthetic in my engines if they have the proper additives. • Your Airhead needs the ZDDP "zinc pac...
Realize that engine building is an art and science unto itself. There is no way I can tell you everything you need to know. I highly suggest you seek ...
I like the Valvoline selection of gear oils. Apparently there are 4 to choose from, 2 synthetic and 2 non-synthetic. None of them make BMW seals sudde...
IMHO..... Your post title needs to include something to clue the reader that this is specific to PA and NY riders. And/or should be posted by the PA ...
Yes from what I have read it's purpose is to open when there is high oil pressure mostly likely cold starts then close as the engine temperature incre...
The forks "top out" with a clunk when jerking up on the center stand, also when rebounding over abrupt road surfaces. Does this indicate low fork flu...
Here's some background information on why it's a good idea to have an oil check valve.... There are lots of older BMWs from the 1970's and 80's sti...
Advertisement
