1. We don't replace ANY engine part by "feel". Cold hard numbers are the only signal. With those we can determine: 1. Is there too much clearance? and...

Here's my take on valve seats. Yes, the factory cut the stock valve seats with general, 3-angle face out of necessity. This because it is necessar...

This "kit" is proabably not complete. They may want you to find your own calipers, and wrecked S-bikes aren't that numerous. So you've got the high pr...

I've been a big fan of the full floating discs for some time. EBC makes them to fit the stock Airhead wheels/brakes. To get the full benefit, you'll...

If you ever feel any resistance, you'll want to STOP! immediately and cut the flange off. The reason is that typically the damage is HIGHLY localized....

The only issue (and therefore experience) I've ever had with the starters is the grease inside the bearings. All the bearings should be re-packed (or ...

Glad to help. Some additional thoughts... • The Pilot jet and enrichener circuit will have the largest effect on starting, cold or otherwise. • Th...

Sorry, but I'm not following. Hope I haven't offended you. The plain and simple is that it takes so long to get to that area, that it's not worth a...

• When I go into this area ALL of the following gets done: oil pump o-ring, c/s main seal, clutch friction disc, splines lubed, new flywheel bolts, ne...

Given: 1. Obviously, 1993 is well into the EPA mandated low emissions era. So you might consider enlarging some of the jets for better performance. ...

It will help you a great deal to get a cheap floor lamp from Goodwill and fit it with 5000K (bright white) LED flood lamps. Then you'll be able to see...

Dave - I know you already know this.... but if the parts are going away from your house, remember that while they are away they may be cleaned by me...

Red or Yellow... you must be talking about Japanese bikes. Each manufacturer uses different color codes for their harness. Posted by: @lars-wa...

The brand of fairing would really help. If it was a Vetter Windjammer then the only wring done was to extend the 3 headlamp wires about 18" to reach t...

The point is that your bowls are supposed to have ZERO varnish. Cold starting is NOT your problem. Cold starting is a symptom of the problem, which ...