The humorous answer is this..... You are allowed to trailer it the first time. But if the guys get it running really good, then you had better ride...

• The secret is really in the surface prep. You should remove ALL the old adhesive from the plaque and starter cover. Scour both parts really well so ...

Adjusting the idle speed at elevated temps will easily bring the idle speed down. It should be easy to get the idling in the 1000 RPM range after this...

Agreed. The viscosity of the cold engine oil slows the RPM of the engine considerably. You really don't want to set the idle mixture OR idle speed unt...

Zinc-ZDDP, or lack of it, will not cause lead fouling of plugs. Zinc protects flat tappets. This means cam shafts and followers. I don't think you wil...

That's for that ! I agree, Katdash is rather unique. I do have a broken flex circuit in my 1988 and was intrigued. What was the general price range...

I'd suggest you look at the Givi line of windscreens. Givi products are well made and generally a cut above the normal me-too type motorcycle accessor...

All the bulbs I needed came from the automotive bulb section of Super Bright LEDs...

You need a GPS that will export the voice via Bluetooth or direct plug. You will never hear the voice from the speaker with all the wind noise on a mo...

There is a nearly identical thread on this subject. After that I replaced my speedo and tach with green LEDs and the difference IS amazing. Try a blue...

If you'll calculate the RPM of the wheel bearings at 100 MPH (a speed you'll agree is ridiculously uncommon) you'll see that it's running quite a bit ...

Ted Porter at Porter's Beemer Shop carries a wide lineup of shocks, and Works may be one of those. He is definitely one of THE guys on BMW shocks. ...

I ended up squirting some electronics cleaner in the turn signal switch, even though I'm waiting for the new one I bought from MaxBMW, that "fixed" th...