• First of all, you've got to understand that almost all tires sold are now tubeless. As such they seal at the inside surface of the tire (the portion...

I agree. It does sound as if your issue is in the carbs. But you've provided zero photos, nor have you responded to my initial input, so simply using ...

► There should already be a "horn relay" in the layout of the OEM R80 harness. If you can locate that, then all you need to do is disconnect the OEM h...

All Airheads seem to require the action of a "choke" to start. That is to say it is mandatory. On the stock Bings, this action does not shut off the a...

• Starter relay is not part of the ignition system. That's connected to the starter button and sends current to the starter solenoid.• The load shed r...

• You might call Euro Moto Elektrik and see if there are reported issues with the switch. • I'm not aware of a relay in the ignition system, but the...

Welcome Aboard !

Mark - Welcome ! That's going to be a killer ride. What a fabulous bike ! 1) I worked professionally on Brit, Asian and German bikes and found tha...

It looks like you have two VDO gauges in place of the stock MotoMeter ones. So you'll still need to make 2 "Y cables" to split the Return (Brown wire)...

These engines defy all other air-cooled engines for wear characteristics. If you are accustomed to British or Asian air-cooled engines that need a reb...

Congrats..... I guess !! I'd be interested in learning about the fuel and engine oil you're using. Either the valve system is experiencing no wear ...

That's 2 separate issues.... • Adjustment is done at the carb end. With engine warm and a carb balancing instrument in place. • Too long is depend...

Did you ask Rick Jones at Motorrad Elektrik ?? /p>

Handsome bike !

Quite the prize !! We'll need photos. Welcome.