To my knowledge, not with the stock BMW grip heaters. The wire from the external heater snakes from the end of the bar down through to the center. ...

Congrats on the start up !! I don't even rate as a Dellorto amateur, but I can type fairly well. 😛 Your carbs are probably not actually "leaki...

As the parts fiche shows, the rod and the gear are one piece, a single unit. So why not re-install the older one-piece unit ??

With apologies to Mr Bent... This thread is being locked because it has wandered too far off subject.

Can you do a video on how your tire changing "machine" works ? My tire changer involves the use of 2 arms and 1 leg. So making a video is somewhat...

Can you do a video on how your tire changing "machine" works ? My tire changer involves the use of 2 arms and 1 leg. So making a video is somewhat...

What tool is it you hope to borrow ??

And now, back to our regularly scheduled thread on what tires to buy.....

I just checked valve with dish soap no leak - I have metal caps on stems so wouldn't that stop that problem? That's what they are supposed to do. ...

Look at the position of the stem relative to the rim. Is the stem standing up straight pointed at the axle, or is it off at an angle ? • Still wait...

There are multiple specially formed rubber hoses which route the breather into the return cover and then from the return cover to one or more of the c...

Welcome Aboard ! First of all, let's clarify you are talking about the Steering Damper, and not the dampers inside the front forks or rear shocks. ...

Robert - Welcome Aboard I haven't done that, but I can see 2 issues that might trip you up.... • The lamps are going to need an electrical Ret...

Since the leak is very likely to be at the valve stem, either because of a poor core or ripped stem, and because the "stop leak" doesn't reach there.....

Sounds "iffy". Are you sure you're not loosing that when you go to measure ? If so, I'd replace the tube. I could believe 3-4 psi per month.