The MAIN advantage of these kits is that you will likely never have to replace floats. That does NOT apply to the float needles, of which there were two basic types. The VITON tipped ones have the same easy-to-lose fine wire clip as on the stock carburetors. That clip insures positive float needle operation when the needle should be leaving the needle seat and allowing fuel to flow into the bowl. If the original floats (which DO AGE) are already really bad, and/or the float needle is already bad, things will certainly improve with PROPER installation of these PRICEY kits! Installation is, however, somewhat tricky. IN MY OPINION, installation of these kits when the old parts were worn, often considerably, is the HONEST & TRUE reason that SOME find improvements with fuel mileage after installing the kits. Adjustment of these dual-independent float kits is more involved than with the stock floats. These kits can cause $$$$ problems, so, please read all of this article.