FORUM

Rick Schroeder
Rick Schroeder
@red-horse
Trusted Member
Joined: 08/24/2020 19:55
Last seen: 06/24/2025 14:17
Topics: 11 / Replies: 50
Reply
RE: 1986 R80RT no odo or trip meter

Darcy, Your issues could be one or both of your problems. First check the speedo cable from the transmission to the underneath of speedo. Make su...

1 day ago
Reply
RE: 1982 R 80 GS - Front Cover Engine Cover Issue

Russell, I could'nt get both pics in the original reply, so i'm adding this to show what MOTORRAD ELECTRIK stresses. good luck redhorse 12173 &...

1 month ago
Reply
RE: 1982 R 80 GS - Front Cover Engine Cover Issue

Russell, Just want to reenforce what Richard said. I've attached portions of instructions from MOTORRAD ELECTRIK for installing their Alpha ignition ...

1 month ago
Reply
RE: Turn signal buzzer '84 100RS

I ran across this issue when replacing the wiring harness on my 81 RT. Looking at schematic (see attached) frobuym EME for '79-80 RS and RT it shows t...

8 months ago
Forum
Reply
RE: 1983 R100RS Tool Kit

Throw in some feeler gauges for valves, etc. rick #12173 81r100rt

1 year ago
Reply
RE: Toolbox Seal

Mark, I've used this 3M product on the same issue, toolbox lid. Also used to secure rubber gasket to windscreen in the corners. Still holding after...

1 year ago
Reply
RE: 1983 R100RS Instrument Cluster

Brian, I had my speedo/tripmeter calibrated this past winter by Foreign Speedo. Their ad is on pg. 5 of 2023 Sept. "Airmail". I gave them a call fi...

2 years ago
Reply
RE: TPMS For Airhead

Joe, I imagine it's very important to monitor your psi especially when you're towing a trailer and/or riding 2 up. Nice to know the TPMS is the sam...

2 years ago
Forum
Reply
RE: TPMS For Airhead

Joe, Wobbly, Have either ofyou checked the accuracy of the TPMS to a good tire pressure gauge? Just curious how true the reading on the display scr...

2 years ago
Forum
Reply
RE: Remounting carbs on '83 R100RS

13 BMW 1983 R100RS Install Carburetors, Cables and Air Box | Brook's Airhead Garage (reams.me) Brook's Airhead Garage Steve, This is a gre...

2 years ago
Forum
Reply
RE: Remounting carbs on '83 R100RS

Steve, Did you try to slide the rubber tube between the air box and the carb back down the hard plastic elbow. Then get the carb attached to the rub...

2 years ago
Forum
Reply
RE: Non-return Breather Valve

Is that where those squeaks are coming from?

2 years ago
Reply
RE: Non-return Breather Valve

Wobbly, - I used for the past 8 yrs, dino 20w50 Valvoline VR1. Prior to that Castrol 20w50 since owing the bike (42 yrs). - Checked recycle wel...

2 years ago
Reply
RE: Non-return Breather Valve

Wobbley, Dave, Sorry for the delay in getting back. I'm also replacing the clutch. The NRV is oriented as you explained Dave. It took some doing ...

2 years ago
Topic
Replies: 8
Views: 889
Page 1 / 5

Advertisement

Scroll to top