
Last seen: 07/03/2025 05:21
The information James gave you is all excellent information, but I like to check the very simple things first:• The Airhead charging system cannot wor...
IMHO, the issue stems from the fact that as a battery connection bolt, that bolt must be tight in order to convey the current required for an electric...
Thoughts....> Can you possibly detail your overall towing experience? For the novice, even experience with automobiles can be helpful.> The trai...
Come by in a truck. I have more body parts than I can possibly ever ship.
If the sub-frame was bent from having the rear fender smashed, then it will typically no longer be horizontal. That will be very evident using the lev...
You'll need a level and a plumb bob. Shim the bike at the center stand until the swing arm is level. Then remove the seat and run the same level along...
Your comment is not attached or quoted within the thread with the balance of the information to which it refers.
My theory is that you need to post photos and links to what you're trying to discuss.
1) After a ride should be no different than 'before a ride'. Cable slack/tightness does not change just because you took a ride.Both cables should hav...
The ignition wiring on these is fairly simple, thus testing is fairly straight forward. Assumptions • We assume this bike was known to be in runn...
From what I can see as a "Junior Moderator in Training" everyone who posted above is at "Approved Status".
â–ş Be aware that your R60 may have "pumper" type slide carbs, which are unlike the CV carbs on an R75, R80, R90 and R100 bikes. (R90S excluded.) So it'...
You took the older and proabably more expensive cure. It's the excessive current draw that heats the wires, and burns the contacts inside the required...
Water in the oil. No doubt about it. It can be anywhere from chocolate brown to a ghastly green that looks like smushed caterpillar juice. Additiona...
Welcome aboard ! What work is it you want done? I propose that the best mechanic is YOU the owner, because... The guy at whatever shop you disco...