Brother, I'm not lecturing. I'm simply giving you all the facts so you can make informed decisions and take wise actions. There just happen to be a 'd...

Should I take that as a vote of "no confidence" on my advice ? Going back to my old parts, both lower cables were the same length, and the same le...

Measuring to the edge of the rim works ONLY if you use the BMW rim. And then, ONLY if BMW hasn't changed design or suppliers. As soon as you sub an Ak...

Call Motorrad Eliktrik and order the "Gen light replacement resistor kit". This "fix" was originally devised for cross country touring.... in case the...

New ignition switch time ! Motorrad Eliktrik has duplicate replacements. BMW dealers cannot supply them.

• Look straight down on the engine. One cylinder is physically set behind the other. The cylinder that's set to the rear uses the longer cable. It's t...

Are you doing the tire fitting yourself ?

By testing the switch with a Ohm meter, find the power feed going to the headlamp Hi/Lo switch and plug it to the Gray/Black on the multi-color connec...

► Sorry, can't help you with connection of non-standard switch products via long distance.► Still no information forthcoming on the operation of the t...

Sounds like quite the time !

Logical Assumptions ► We will start with the assumption that since the Passing Switch works, that both the bulb and fuse are good. This has about an...

Hammer and punch. Have a new plug and seal ready to install. From now on use only the correct size metric hex SOCKET wrench on a pull handle to chan...

That's a MUCH BETTER choice for "around town" riding !! You'll be much happier, with much less trouble. Be sure and fit an LED headlamp bulb to rais...

Have you looked in the Airmail for advertisers ?

I have no experience with the JB Weld product you show. I love their adhesives, and that's my concern here... that this product is more of an adhesive...