Smack it with a big hammer. Or if you have the clearance, position it so that you can get a large adjustable wrench on there and bend it back.

Thoughts.... • If first oversize is 0.5mm, then that's about 0.020", or second oversize on most other engine brands. 0.020" will clean up everything...

I have been riding with that exact mod for several years now. It does work very nicely.

► Intermittent shorts are the hardest to find. They are usually caused by a chaffed wire that is occasionally touching grounded metal at a sharp bend ...

STARTING POINT 1. First off we'll have to assume you are using 8A fuses and not something lower, like 6A. The BMW wiring design only has the two fus...

Actually I think it helps everyone to have all your posts within one thread. Proceed.

Thanks for the pic. Yep, that shouldn't be there. Someone may have been trying to lube the U-joint.

The original intended use was for older riders to be able to load up baggage and passenger on the center stand with great stability, and then simply "...

Before and after JPEG photos, please.

Probably be easier just to buy some good used tops.

Very nice !!

• HEIC file formats are NOT compatible with this website. PLEASE repost your photos in JPG format. • The only "grease" is the L and R tapered roller...

@john-griffin Checking the shocks is a great idea. The OEM shock length is 340mm CTC (center-to-center). • 120/90 may be the widest tire the swing ...

The Reynolds Ride-Off is a nice piece of kit and works well.... but you must have the correct size tires to use it. 3.25-19 front and 4.00-18 rear, or...

► That's what BMW stands for..... Bivouac Mice all Winter ! ► As to the special parts, I'd get a used piston-cylinder set from the Buy & Sell f...