Welcome Aboard ! Allow me to comment on your input, in order... • What you're experiencing could a fuel issue or a charging issue. Or, since the b...

There was a product mentioned on these pages, maybe a year ago, which is akin to the OEM Airhead tank treatment. If you are going through the trouble ...

I need to leave some issues for other members to answer. ?

It's either the power to the gauge, the gauge itself, the wiring from gauge-to-sender, or the sender. Start at one end and work your way in a logical ...

You may never get all the bits out. Once it starts, it won't stop coming. Obviously, a shake of the tank with a pint of gas and no petcocks, and then ...

You need to separate the reflector from the glass lens to take that part off. I rode like that for several years before I read the suggesting from Sco...

Check your clutch lever safety switch first. Those go out with frequency and your issue sounds like it needs some looking at. Hope this helps.

► The Katdash IS very nice, but runs in excess of $400. It's main use is to repair the lamp connections. You see, the OEM flex circuit board has very ...

The RT seat I was telling you about had zero J-hinge pieces. In their place was a 1/2" dia post (about 2-1/2" long) added to the bottom of the seat. T...

Some thoughts... Installing wide angle GREEN LEDs for gauge back-lighting makes the cluster brighter, without making them glare or distract. Insta...

I believe BMW would supply whatever you wanted. My parents took delivery of a new RT in Germany about 1985 and that bike's speedo was in MPH. A...

STOCK On all my bikes, the hinge "pin" is welded to the frame. I believe both pins point to the rear. On the bottom of the seat are bolted 2 piec...

You're on your way !

You still need to wash off any residual brake fluid left behind. Hot soapy water is the trick. A LOW-pressure washer can be handy. You also still need...

It's like a #4 Plastite screw. You'll need a #1 Phillips to take it out. Because the screw can't "bottom out" on the soft rubber of the connector, it...