Last seen: 12/04/2024 10:55
Moving sounds like good advice. 🙂 Apologizes for not having real advice. I just titled 2 bikes in Ga from Fla. My county title office doesn't like ho...
No free play is an adjustment. I would try adjustment before replacing the clutch. The procedure is in the owners manual. Basically you adjust the cab...
One of the dou resigned making it a uno? A straw pole to elect the board is not in the bylaws so cannot be used even if the BOD wanted to. Who created...
You might ask how much Jan was being paid to produce the Airmail. Jan also had a reputation of cherry picking what got included in the Airmail. Que th...
The bylaws published on the web site are incredibly vague. In practice for most Air Marshal I expect it is difficult to find more than 1 candidate. Th...
If that is really what Jan proposed for the Feb Airmail, it is the best argument I have seen that he should be replaced as editor. It is very one side...
@9937 I have not seen or heard that they want to discontinue OAKs column. What is being discussed is they do not have permission to publish Oaks colum...
It is really hard to say. Water in the the gear box is never good. Has the bike sat outside for a long period of time? What is the condition of the bo...
The Clutch parts changed in 81. The adjustment procedure is the same though. Tom Cutter has a good write up on his web site. The push rod needs to sea...
Yes if you replaced a 12 MM master with 15 MM master then the pull will be substantially harder. EME has 12MM in stock. Probably other people as well....
@dartnmartn The Airhead email list is primarily a list for technical discussions with a few diversions. It is not in anyway associated with the Air...
The web site for the manufacturer is <This was discussed on the Airhead email list about a month ago. Most with experience felt it was an worthwhile...
Bing has a web site. They have both parts and technical support. Parts tend to be cheaper from BMW sources though. Anyway here is a listing for all th...
There looks to be a grease fitting on the U-joint? If so it is either aftermarket or modified. Which could be a good thing. The drive shaft is a weak ...