Last seen: 12/11/2020 18:49
Right on !I Disassembled the front master cylinder fully expecting a rusty mess that was preventing the piston to fully extend. The bore was clean an...
Hi group I had a simular problem with my 82 R100 RT clock not working. I wanted to keep the original clock on the bike and after much searching I fo...
Wobbly Regarding question #3. I have owned the bike for two years. When I purchased the bike from the PO it needed a lot of mechanical work but it ...
Hi Wobbly Air box and filter checked out OK, manometer plugs are in place, rubber hoses to and from carbs are fine. Fuel filters are clear and allo...
OK - I measured the gas flow through the fuel filters and it met or exceeded the criteria for fuel flow. Also, I followed the instructions for the...
Thanks Scott I will start with the easiest and progress to the carb rebuild if necessary. I will let you know what I find.
Thanks Harry. I knew that someone would have the answer. Looks like Amazon will get the nod. JB
Wobbly I am not very literate with the computer link stuff ( I am an airhead remember) but the best I can do follows. In your search box type "flic...
Hi Wobbly I found an answer to my bezel removal problem. I Googled bmw motorcycle clock repair". I found a Flicker site titled "BMW motorcycle cloc...
Thanks Murphy I will open up the bucket this winter when I am performing PM and give everything a through cleaning.
Thanks guys. I kinda like it - i notice it more than the blinker light during the daytime!
Hi Wobbly the fluctuating voltmeter happens all the time with the headlight on or off or when idling or driving down the road. I have not opened the...
Thanks Bret I wonder if the screen will be readable in the sunlight. Nothing ventured nothing gained. I will give it a try Johnb
Thanks Scott I will keep the gasket clean and re-torque the pan bolts after first ride this Spring. John B
Thanks wobbly. I never fullly understood the "floating disk" concept until you explained how they center up.