Several things.... • There's no need to start a new thread. Keep ALL your correspondence about this problem in one single thread, PLEASE. • I d...

I do this work quickly and easily on the center stand. Careful to use a properly sized torque wrench for re-assembly. Those bolts can't take take much...

Welcome Aboard ! Sorry, but first time posters have to wait for their post to be cleared. Your thread is now posted. In the last years of produ...

Welcome Aboard ! Your problem is most likely NOT electrical !! Remove the fuel tank and on the LH side of the frame, just under the brake m/c is a ...

Congratulations "kid at Christmas" !! May the feeling never end !

I'm wondering if I should connect the ammeter in series and then start the bike, or if I need to start it then pull a cable to connect the ammeter. ...

Koni turned into Ikon. (See the same 4 letters?) Since the spanner comes with the shocks, you might call Ikon and see if they can provide that tool.

On a Club ride it's easy enough to post a PDF file on the web site with directions, phone numbers, meet-up places listed. Then the people who want a m...

It sounds like, as far as riding style and skill, you had a mis-matched group. This can easily happen when your group gets larger than 4 riders. Perso...

Welcome Aboard ! Yes, removing one of the battery leads is a must when the front engine cover comes off. • Your actions would not normally cause...

And did you install new plugs ? Look, plug wires, caps and new plugs all together total under $20. Why don't you stop all this foolishness and simp...

That's a very hard question to answer. So what I would do is go to the top of the forum, to the pull-down menu "AirBazaar". There you will find severa...

It takes me the better part of a whole day to go thru a set of carburetors. You would have starved to death as a pro-mechanic. 👿 The se...

I would say that it will take you as long to fashion the new choke hookup as it will to rebuild the older carbs. Of course that's assuming you have a...

I believe that drilled hole is the breather for the drive shaft oil. The drive shaft and the gearbox then breathe through the speedo cable retention b...