The typical failure of these master cylinders is from "not working great" or "failure to bleed properly" rather than outright leakage. If your rebuild...

Thanks !!

Thanks. Mine seems to be dripping oil out where the spade connector exits the plastic body. Some stories online talk about the plastic end blowing off...

Classic oval pattern too. 😛

It's my humble opinion that from a pure manufacturing standpoint that the flywheel and crank are balanced together. That is, that weight is removed fr...

Acewell, Koso, and Trail Tech are the familiar ones.

I know the Master cylinder works best at the highest point, but I've always liked the cleaner look of no hoses. That's not why I suggested handle...

Then you might also wish to investigate a master cylinder with a smaller diameter bore. Something around 13mm. You'd want that handlebar mounted too. ...

PS. I'm in need of a single disk to replace my deeply scored rear disc. If this upgrade leaves you with a good spare, I'd be interested to hear a pric...

I rode a friend's '81 R100 RS with the EBC floating rotors and the difference was ama-ZING. Now to be clear, he's a mechanic and keeps his bikes in ti...

► Do all your new friends here a favor. Go back and edit your first post within this thread and change the title from "Electrical Problem" to "Regulat...

First of all, there are several different length clutch cables available. Unless you're using the stock bars, the stock cable may not allow the best f...

Hell of a shop you got there. Hell of a bike lift !! 😆