FORUM

Richard W
Richard W
@wobbly
Member
Joined: 03/05/2016 16:59
Last seen: 11/19/2025 08:44
Topics: 91 / Replies: 2608
Reply
78 R100S

The oil for my left Fork came out looking like weak coffee. And nothing came out my right side at all. The brownish look is usually caused by wate...

7 years ago
Reply
What engine do I have?

Bought a 1981 R65 described as “upgraded by prior owner to R80 specs”. No other info available from the seller. I have been collecting clues; hope you...

7 years ago
Reply
78 R100S

Now incorrect assembly could possibly be the problem if the entire fork internals were disassembled. But fork internals aren't usually disturbed on a ...

7 years ago
Reply
H4 Headlight replacement BIGGERish AND BRIGHTER

You mentioned a “headlight modulator”? Duh, what’s that? After the 1981 Hurt Report found that 3/4 of all motorcycle crashes were frontal and caus...

7 years ago
Reply
H4 Headlight replacement BIGGERish AND BRIGHTER

What would then be a good replacement for a 1979 R65 headlight bulb? I quite like the "parking light" feature, but would like a main lamp that A. is ...

7 years ago
Reply
Master Cylinder question

I had to rebuild one caliper in this ordeal and now I know exactly how they work. And that's why Club Cannon #6 is so important. If you don't do i...

7 years ago
Reply
Master Cylinder question

Hey, congrats ! As you ride this week, at the rest stops... lean the bike slightly to the left (making the m/c the highest point) and give several ...

7 years ago
Reply
RS Handlebars: A New Option

You can click on the Amazon link for a photo of the bars being discussed. Sorry, no photos of them installed. I've since removed these type "fixed"...

7 years ago
Reply
Master Cylinder question

You are exactly correct in your thinking. The factory gets away with the loop over the wheel simply becasue they push fluid in at such a pace that ...

8 years ago
Reply
Master Cylinder question

I went an bought a new pump oil can and filled it with brake fluid. Then a 2" section of battery hose was used to connect the can to the bleed nipple....

8 years ago
Reply
Newbie

Welcome aboard !

8 years ago
Reply
Carburetor and ignition switch issues?

You're certainly welcome for the help. Remember though, the first place to start is always with the 3 functions. That will narrow down your list of cu...

8 years ago
Reply
Carburetor and ignition switch issues?

The bike was running well a few weeks ago, I was out for a long ride and the bike back fired and started to sputter and completely lost power - seemed...

8 years ago
Reply
1.5 amp current leak

Using meters for testing can give misleading results, and I am assuming you have fallen into one of those traps. What you are reading is merely ...

8 years ago
Forum
Page 130 / 180

Advertisement

Scroll to top