Perfect, thank you so much! I'm going to order the screw kit.

Thank you for your reply. I just measured my bars with a digital caliber, 21.97mm. Ok, after taking the switch part off my perch I found a large...

Just another option. EME has a rebuilt bean can exchange program, . The cost is $280, but they refund you $100 when you send them your old bean-c...

I have the same problem with one of the my carbs. on my 1980 R100T. Both of my carbs were blasted-n-rebuilt by BING USA. I contacted them, can't rem...

I have the same problem with one of the my carbs. on my 1980 R100T. Both of my carbs were blasted-n-rebuilt by BING USA. I contacted them, can't rem...

* Pre-made 5K NGK wires from Motorrad Elecktrik. * As far as the spark plugs go, there-in lies the problem. Different websites, different retaile...

My cables and caps were already assembled when I bought them. I measured from the connector inside the cap to the connector on the other end, 5K! ...

Thanks for the reply Wobbly, I appreciate your suggestions. Actually I've done a lot of work on my bike, yes, turned my own wrenches. My bike was ru...

First-off, I have a /7 which is wired somewhat different than a /6. But the concepts are the similar. I took a look at the wiring diagram for you...

I found this printout years ago(see attachment). This tool is for torquing the drive shaft bolts. Not sure if it's for the bolts you're talking abou...

Thank you Wobbly, Chris Harris's video sure is misleading, for as you say a "novice" like me. I was thinking, he was somehow catching one cylind...

...4 engine rotations to adjust 4 valves. I just watched Chris Harris's Airhead Valve Adjustment video on YouTube. First, he sets the engine a...

So... what is the arrow under the "OT" mark for? Finally, I have three Wurth feeler gauges. * Purple (10) * White (15) * Blue( 20) I've seen ...

Thank you for your comprehensive replies guys.

I have a 1980 R100. I understand I need to get my cylinders to Top Dead Center to adjust my valves. My questions are, when setting Top Dead Cent...